TC Electronic Finalizer PLUS/96K User Manual

38
WIZARD
Select source type: soft/medium/hard
Select degree of compression:
soft/medium/hard
Optimize gain
If this option is selected the Finalizer will adjust
the Normalizer level.
Press OK to start procedure
EQ
The Finalizer will adjust the Equalizer to the selected
spectral expression.
WIZARD - Making the whole thing very simple
Press the WIZARD key.
The Wizard is a guide that will help you find the right settings of the Normalizer, Compressor, Limiter and EQ for your specific material.
By answering a few relevant questions the Wizard will suggest settings, in all of the above mentioned blocks, that will suit the material you
are working on. Further fine adjustment can of course be made at all times, but by using the Wizard you will have an excellent starting
point.
- Select whether your source type is soft, medium or hard, using the ADJUST wheel.
- Select which kind of compression you like: Soft, medium or hard.
- Select Optimized Gain and press OK to start procedure. Press any key to stop the procedure.
- Select which EQ type you would like: Flat (no EQ), Loudness, Bass-lift or Air, and press the OK key.

TC Electronic Finalizer PLUS/96K Specifications

General

Brand	TC Electronic
Model	Finalizer PLUS/96K
Category	Computer Hardware
Language	English