will send the “wet” effects and the Right (Dry) output
will send your dry voice.These can be adjusted by your
sound engineer.
Performing a Factory Reset
A reset will delete all of your edited presets and return
all settings to the factory defaults.To reset the unit, insert
the power connector while holding the Manual and
Voice 2 buttons.
To Change the Tuning Reference
By default, Harmony-G XT is tuned to A=440 Hz and
the harmony voices will sound in tune when you sing
with a guitar tuned to A=440. If you will be playing guitar
and singing with an instrument tuned to a different
reference e.g. a piano that has dropped in overall pitch,
you can change Harmony-G XT’s reference with the
following procedure.
Press and hold the Manual, Double and FX buttons
simultaneously as you plug in the power adapter. Then
place your microphone near the instrument you want to
tune to and play any single note from it. Press any button
to exit to normal function.
You can now tune your guitar to the new reference.Your
guitar and the harmony voice’s pitch will match the
reference instrument.
Note that the tuning reference is reset to A440 the next
time power is removed from Harmony-G XT.
For Advanced Users
23
EN
To Next Page
Loading...
Need help?
General
