TC-Helicon Voicelive 2 User Manual

o Minor-Nat (natural minor)
o Minor-Asc (ascending melodic minor)
o Chromatic (no key or scale required)
NOTE / ENABLED
These are applicable when you wish to edit a custom
scale for HARDTUNE. A custom scale is indicated by a
series of dashes and circles: “-” and “o”. Each of these
symbols represents where a note is in the correction
scale or not. You can change the custom map by
selecting a note you want to be corrected to or to jump
over with the NOTE parameter and setting its ON or
OFF status with the ENABLE parameter. You’ll see an
indication of your custom scale with “o” representing
notes that are enabled, and “-” showing notes that are
disabled. For example “o-o-oo-o-o-o” would represent
a major scale in any key (the octave up note is implied
by the root note).
The Edit Menu: FX Tab
78

TC-Helicon Voicelive 2 Specifications

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity	Max. 90 % non-condensing

Power

external power supply mains voltage	100 to 240 VAC, 50 to 60 Hz
power consumption	<14 W

Analog Inputs

mic input impedance	2.14/1.07 kOhm
line input impedance	13/6.5 kOhm
guitar input impedance	1 MOhm

Analog Outputs

output impedance	100/50 Ohm
output range	16 dBu / 0dBu
dynamic range	> 109 dB, 20 Hz to 20 kHz

Weight and Dimensions

dimensions	13.8" x 3" x 8.5" (350 x 76 x 216)
weight	5 lb. (2.3 kg)