32
Effects - Guitar cont.
f Page 2
Treble - Controls the amount of high frequency boost or cut. The EQ point and width (Q) changes
between amp styles to reect their real-world operation.
Bass - Controls the amount of low frequency boost or cut. The EQ point and width (Q) changes
between amp styles to reect their real-world operation.
Mid - Controls the amount of mid frequency boost or cut.
Mid Freq- Controls the specic frequency that the Mid control affects.
Comp Ratio - Controls the compression ratio of any signals entering the guitar signal path. Higher
compression ratios will affect the sound more noticeably. (which may be just what you want)
Comp Thresh - Sets the level at which the compressor begins to attenuate the signal.
The combination of ratio and threshold create the “compressed” sound, so experiment with different
values on each control until you nd something you like.
f Page 3
µMod Speed - Sets the speed (in Hz or Hertz) of any modulation effects.
Delay Feedback - Controls the number of Delay “taps” that you hear. Lower numbers make the
Delay end sooner (not the time between “taps”, just how long you hear it before it’s gone) and higher
numbers make the Delay last longer.
Speaker Rolloff - Sets the low-pass (or hi-cut) filter point frequency. This setting is useful in
changing the overall tonal qualities of the Amp setting.
To Next Page
Loading...
Need help?
General
