The Edit Menu
26
Type parameter
This parameter is only available for the Rhythm styles.
The Type parameter sets the waveform for the rhythmic
modulation applied to the signal. You can choose from standard
waveforms (“Square” to “Sawtooth Down”), “Sample and Hold”
(random), and syncopated patterns.
Sample Capture*
This parameter is only available for the Stutter/Sample styles of
the Rhythm effect.
The Sample Capture parameter determines when audio sam-
pling occurs as detailed following:
End setting
Sampling occurs previous to the point when you enable the
Rhythm effect block.
Start setting
Sampling occurs after you enable the Rhythm effect block.
Path parameter*
This parameter is only available for the Stutter/Sample styles.
The Path parameter sets how the other effects (all effect blocks
except for Harmony, Double and Hardtune) are applied to the
sample.
Post setting
When the Path parameter is set to Post, effects that are en-
abled when the audio clip is sampled will be integrated into the
sample, but further effects cannot be layered upon it.
Pre setting
When the Path parameter is set to Pre, the audio clip is
sampled without effects, but once the clip is playing back, other
effects can be layered on the fly.
* This parameter is linked to the currently selected style.
To Next Page
Loading...
Need help?
General
