EasyManua.ls Logo

TCi MFC A - Page 49

Default Icon
61 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MFC Kit Instructions 5.0 PQconnect Option
46
PCB under temperature
clear threshold*
STATUS_T_AMBIENT_UT_DELAY
642
Input
DEFAULT: = 6
seconds.
Range 1 to 3600
seconds
Status detection delay time
in seconds.
PCB under temperature
delay threshold*
STATUS_T_AMBIENT_OT_ONSET
645
Input
DEFAULT: = 750 =
75C
Range 10C to 85C
Status detection measure in
degrees Celsius.
PCB over temperature
onset threshold*
STATUS_T_AMBIENT_OT_CLEAR
646
Input
DEFAULT: = 700 =
70C
Range 10C to 80C
PCB over temperature clear
threshold*
STATUS_T_AMBIENT_OT_DELAY
647
Input
DEFAULT: = 6
seconds.
Range 1 to 3600
seconds
Status detection delay time
in seconds.
PCB over temperature
delay threshold*
STATUS_PHASE_LOSS_ONSET
650
Input
DEFAULT: = 60 = 60
%
Range 1 to 100
Filter output voltage phase
loss onset threshold*
STATUS_PHASE_LOSS_CLEAR
651
Input
DEFAULT: = 65 =
65%
Range 1 to 100
Filter output voltage phase
loss clear threshold*
STATUS_PHASE_LOSS_DELAY
652
Input
DEFAULT: = 6
seconds.
Range 1 to 3600
seconds
Status detection delay time
in seconds.
Filter output voltage phase
loss delay threshold*
STATUS_CPU_ERROR_DELAY
655
Input
DEFAULT: = 6
seconds.
Range 1 to 3600
seconds
Status detection delay time
in seconds.
PCB processor CPU error
delay*
STATUS_HIGH_THD_WARNING_ONS
ET
660
Input
DEFAULT: = 12 = 12
%
Range 1 to 100
Filter output voltage high
THD onset threshold*
STATUS_HIGH_THD_WARNING_CLEA
R
661
Input
DEFAULT: = 11 =
11%
Range 1 to 100
Filter output voltage high
THD clear threshold*
STATUS_HIGH_THD_WARNING_DELA
Y
662
Input
Status detection delay
time in seconds.
DEFAULT: = 6
seconds.
Range 1 to 3600
seconds
Filter output voltage high
THD delay threshold*
STATUS_MIN_DETECTION_VOLTAGE
670
Input
DEFAULT: = 5 = 5%
of rated voltage
Range 1 to 100
Minimum voltage to enable
status detection*
FUND_MIN_TRACKING_VOLTAGE
680
Input
DEAULT: = 5 = 5% of
rated voltage
Range 1 to 100
Minimum voltage to enable
output voltage tracking. If
the filter output voltage is
below this threshold the
waveform data will be
zeroed out and the
metering data will report a
value 65535 (or 0xFFFF