8
Notes
•The low battery prompt tone is heard via the earbuds when the battery level for the
earbuds is less than 10%.
Chapter 4. Bluetooth
Enjoy music and hands-free calling with your earbuds by using the Bluetooth function of your
device.
Connect with a Bluetooth device for the fisrt time
Pair your Bluetooth device to use it with the earbuds for the first time. Before you make the
pairing operation, make sure your earbuds and the charging case are charged sufficiently.
To pair the earbuds with your device for the first time after purchase or after resetting the
earbuds, follow these steps:
1. Take out your earbuds from the charging case, remove the insulation tape before using the
earbuds for the first time, then place the earbuds in the case.
2. Press and hold the function button for 3 seconds.
3. The case LED indicator flashes in blue in cycle.
4. Unlock your device, and turn on the Bluetooth function on your device.
Select TCL MOVEAUDIO Air from the list of available devices to complete the connection.
00:03
90%
TCL MOVEAUDIO Air
√
Note
•When you pair the earbuds with a device for the first time after purchase or after
resetting the earbuds, the earbuds enter pairing mode automatically if you open the
charging case.
•If pairing is not established within 5 minutes, the pairing mode will be cancelled and
the earbuds will turn off.
To Next Page
Loading...
Need help?
General
