9
D
isconnect from a Bluetooth device
Disconnect your earbuds from the Bluetooth device using these methods:
•Put both earbuds in the charging case, and close the case.
•Turn off the Bluetooth function on your device.
Go to the Bluetooth menu of your device, tap your earbuds from the list of paired devices, and
select disconnection option.
NOTE: The disconnection procedure may vary depending on your device model.
R
econnect with your device
s
After successful pairing, the earbuds will automatically connect to the last paired device if taken
out of the charging case.
NOTES
•The earbuds and Bluetooth device must be turned on and within connection range.
•If the earbuds cannot find and connect to the last paired device, they will enter pairing
mode shortly. You can still reconnect your earbuds to the device from the Bluetooth
menu of your device.
R
estart the earbuds
If you encounter connection or pairing issues when using your earbuds, try restarting them by
following these steps:
1. Put both earbuds in the charging case, and close the case.
2. Wait for more than 2 minutes.
3. Take your earbuds out of the case. The earbuds have been restarted.
NOTE
The pairing information is retained even if the earbuds are restarted. The earbuds will
automatically connect to the last paired device if taken out of the case.
R
eset the earbud
s
If you have to reset your earbuds due to connection or pairing issues, follow the steps below:
1. Place the earbuds in the charging case with the lid open.
2. Press and hold the function button for 10 seconds.
To Next Page
Loading...
Need help?
General
