!
Caution: Your wall mount must be able to bear a minimum of five times the TVs net weight to avoid
damage.
Note: The wall mount bracket and the screws are not included
To use the stand
Your TCL Roku TV comes without the stands attached so that you can choose to use the stands or mount
your TV to a wall using a wall mount (sold separately). If you want to mount your TV to the wall, don’t
attach the stand legs.
A – Place the TV face down on a soft, cushioned surface on a table. The bag the TV was packed in makes
a good cushion. Position the TV so that the stand, when attached, will hang over the edge of the table.
B – Take out the two plastic covers from the stand holes at the bottom of the TV.
C – Put the column of the stands into the TV, align the stands with the screw holes located on the TV.
D – Secure the stands to the TV with four (4) screws.
To Next Page
Loading...
Need help?
General
