Guided Setup
With the preliminaries out of the way, it’s time to turn on your TV. As the TV starts for the first time, it
leads you through Guided Setup, which configures the TV before you start to use it.
During Guided Setup, you’ll:
• Answer a few questions
• Provide network connection information
• Get a software update
• Link your TV to your Roku account.
• Connect devices such as a DVD player, game console, or cable box.
Starting Guided Setup
To start Guided Setup, press the POWER button on the remote to turn on your TV.
Note: Guided Setup normally runs only once, the first time you turn on your TV. If you need to run Guided
Setup again, you’ll have to perform a factory reset, as explained in Factory reset everything.
When you first turn on your TV, it will take a few seconds to get itself ready. You’ll notice the following
things happening:
1. The status indicator blinks every time the TV is busy doing something; in this case it’s powering
up and getting ready for you.
2. The power-on screen appears and the status indicator blinks slowly for a few more seconds. The
power-on screen shows a brand logo while the TV starts up.
3. After a few seconds, Guided Setup starts.
To Next Page
Loading...
Need help?
General
