!
Completing Guided Setup
Follow these steps to complete Guided Setup. At this point, you should be seeing the Language screen.
1. Only on models that have a Roku voice remote: A few moments after the Let’s get started
screen appears, Guided Setup starts the pairing process for the voice remote. (You’ll know if
you have this type of remote because it will have microphone or search button just below the
down arrow on the purple pad.) If the voice remote does not pair automatically, follow the
instructions on the screen to complete the pairing process.
Tip: On TVs sold in the United States, if you are blind or visually impaired, you can activate Audio
Guide, a text-to-speech screen reader to help you navigate the TV’s menus and commands. To
enable the Audio Guide, press the Þ button on the remote four times in rapid succession. Repeat
to disable Audio Guide. (The Þ button is located directly below the directional pad on the right
side of the Roku remote.)
Note: If you enabled Audio Guide, choosing any language other than English disables it.
2. Press the DOWN arrow on the remote to highlight your preferred language, and then press OK
or the RIGHT arrow.
To Next Page
Loading...
Need help?
General
