!
8. Only in connected mode, you have the option of setting up Live TV Pause. The topic Pausing Live
TV explains how to set up and use this feature. If you don’t want to set up Live TV Pause, or if
this option is not available to you, select Done to start watching Live TV.
Tip: Repeat the channel scan from time to time to make sure you are receiving all of the latest
channels. Broadcasters add and remove channels, move channels to different parts of the spectrum,
and change the power levels of their channels periodically. Your antenna reception and picture
quality depend on the position of your antenna and on your location relative to the antennas of
broadcasters in your area.
Note: You’ll have to repeat the channel scan if you remove and re-add the Antenna TV tile from the
Home screen or perform a factory reset. To repeat the channel scan, go to Settings > TV inputs >
Antenna TV > Scan again for channels > Start finding channels.
Now, you’re ready to watch Antenna TV! While you’re watching, try the following tips:
• Press the UP and DOWN arrows to change channels.
• Press the LEFT arrow to display the channel list (non-connected mode) or Smart Guide
(connected mode), and then use the UP and DOWN arrows to select a channel to watch. Or
press REWIND or FAST FORWARD to jump through the channel list or Smart Guide a page
at a time.
• Press OK to display information about the current program.
• Press Þ to see options for picture and sound settings.
• Only on models that have a Roku voice remote, hold down or , and then say the name of a
movie, TV show, actor, or director. The TV displays the result and the streaming channels that
offer the requested content. Only in the United States, the results also include shows on
Antenna TV channels.
Note: If you do not have a Roku voice remote, you can use the Roku mobile app to search. For more
information, see Getting and using the Roku mobile app.
To Next Page
Loading...
Need help?
General
