Page 10 MICROgarde controller I and II 04.20.11.18
Cabling Requirements
All communications and reader cables should be in screened cable and at least two metres
long for full EMC protection and maximum reliability.
2.3.1 Choosing the correct cable
Note. TDSI recommends using screened cable throughout for ALL cables including door
sensors, exit buttons, inputs and lock.
Connections to the power supply and any readers MUST use screened cables. With
communications cables, you are strongly recommended to use a screened cable.
Table 1 lists the recommended cable types.
To Next Page
Loading...
Need help?
General
