Teac A-6010GSL - Page 3

:
1. GENERAL DESCRIPTION
The TEAC A-6010GSL is a three motors, solenoid operated, four high
density ferrite heads provided (forward; erase, record, playback and
reverse playback). Dual system automatic reverse, phase sensing sig-
nal or foil operated.
The AR-70GSL preamplifier circuits use IC and silicon transistors.
Independent circuits are provided for recording, monitoring, VU meter
amplifier and playback functions. Electrical assembly provides two
level bias selector for conventioanl and low noise/high out tapes, dual
scale VU meter, meter level switch for optimum recording accuracy with
any type recording tape. Full MIC/LINE mixing capability with individ-
ual level controls.
This service manual provides adjustment and alignment procedures, sche-
matic diagram, parts replacement information and the proper procedures
for obtaining necessary repair parts.
If adjustments or repair procedures are not clear or seem difficult to
accomplish or should you desire more detailed technical information,
please contact your nearest TEAC dealer, TEAC Corporation or affiliated
corporations, addresses of which are printed in this manual.
— INDEX
1. GENERAL DESCRIPTION
2. SERVICE DATA
3. EQUIPMENT REQUIRED
4. PARTIAL DISASSEMBLY
5. HEAD MECHANICAL ALIGNMENT
6. MEASUREMENT AND ADJUSTMENT
-MECHANICAL~
7. MEASUREMENT AND ADJUSTMENT
-ELECTRICAL-
8. PREVENTIVE MAINTENANCE
9, TROUBLE SHOOTING CHART
10. SCHEMATIC DIAGRAM
11. PRINTED CIRCUIT BOARD AND PARTS LIST
12. EXPLODED VIEW AND PARTS LIST
13. WARRANTY AND PACKING FOR SHIPMENT
14. MANUAL CHANGE