Do you have a question about the Teac A-6010GSL and is the answer not in the manual?
Signal-to-Noise Ratio | 55dB |
---|---|
Track Configuration | 4-track, 2-channel stereo |
Input Connectors | RCA |
Output Connectors | RCA |
Output Voltage | 0.775 V |
Heads | 3 heads |
Motor | 2 |
Reel Size | 7 inch |
Tape Speed | 3.75 / 7.5 ips |
Frequency Response | 30Hz - 22kHz (7.5 ips) |
Wow and Flutter | 0.08% |
Input Sensitivity | 0.25mV (Mic), 50mV (Line) |
Steps for replacing the left tension arm.
Steps for replacing the right tension arm.
Procedure for replacing the reel motor.
Procedure for replacing the capstan assembly.
Procedure for replacing the capstan motor.
Adjusting the height of the erase head pole.
Adjusting the height of the record head pole.
Adjusting height for reverse and forward playback heads.
Measuring flutter and tape speed.
Coarse and fine adjustment of playback head azimuth.
Adjusting playback frequency response and equalization.
Checking signal to noise ratio.
Coarse and fine adjustment of record head azimuth.