Teac LCDV2255HD - Connecting to a TV Antenna; Connecting to Earphones

- -
17
System Connections
Connecting to a TV Antenna
Connect TV signal input source from the aerial to the TV jack on the rear panel of the unit.
After connection, turn on the power of the unit. Then press the INPUT button and the direction
buttons to select TV or DTV mode, press the ENTER button to confirm and conduct program
selection.
Connecting to Earphones
Connect earphones (headphones) to the earphone jack on the rear panel of the unit for listening to
the audio output in seclusion.
The internal speakers output will turn off automatically after the earphones have been connected.
Excessively loud volume could damage your hearing. Turn down the volume before you connect
the headphones and then raise the volume to a comfortable level.