Teac T-R650 User Manual

8
Listening to FM/AM
1
Select FM or AM by pressing the BAND button repeatedly.
2
Select the desired tuning mode.
Each time the TUNING MODE button is pressed, the tuning mode
changes as follows:
Manual tune
Auto tune
Preset tune
FM < Auto tune >
108.00MHz
FM < Manual tune >
108.00MHz
FM < Preset tune >
CH01 108.00MHz
3
Select the station you want to listen to.
Manual tuning mode
Turn the TUNING/SELECT knob until the station you want to
listen to is found.
The frequency changes by a fixed step (FM: 50 kHz steps, AM: 9
kHz steps).
Auto tuning mode
Turn the TUNING/SELECT knob to begin auto tuning.
When a station is found, the unit tunes in the station
automatically. Repeat this step until the station you want to
listen to is found.
< Press the ENTER button to stop the auto tuning. (on the front
panel of the unit)
< Use the TUNING button (
) when using the remote control
unit.
Preset tuning mode
See page 9 to 13.
FM Mode
Pressing the FM MODE button alternates between Stereo mode
and Mono mode.
Stereo:
FM stereo broadcasts are received in stereo and “Stereo” is
displayed.
Mono:
Select this mode when the signal is weak. Reception will be
forced monaural, reducing unwanted noise.

Teac T-R650 Specifications

General

Brand	Teac
Model	T-R650
Category	Tuner
Language	English