Additional informations
TBS CLOUD
All TBS Tracer transmitters and the Fusion video receivers include a built-in WiFi module which allows you
to connect all your gear through the TBS Cloud. This allows to use features like VTX follow*, dynamic VTX
power* and other upcoming features.
Note: at the moment all the Cloud features require a hotspot with internet access.
*TBS Fusion video receiver required
Menu
● WiFi Client
○ AP Mode: enables/ disables the WiFI module
○ Default SSID: enables/ disables the SSID broadcast of Fusion hotspot
○ SSID: SSID/ name of the selected external hotspot
○ Password: password for external selected hotspot
○ Connect: manually connect to the network. Only necessary when a new network is chosen
in
SSID
option
○ Scan: scans for WiFI networks. Found networks can be chosen under
SSID
, manual
reconnect by
Connect
is required
○ Forget WiFi: erases all saved networks and their passwords
○ Upgrade: starts the self update for the WiFI firmware. Disabled at the moment
● WebUI
○ AP Lock: enables/ disables password authentication for Fusion internal WiFi hotspot
○ Password: set up a password for Fusion internal WiFi hotspot
○ Login: enables/ disables password authentication for Fusion internal Web Ui
○ Password: set up a password for Fusion internal Web Ui
● About
○ WiFi: name of the WiFi hotspot/ Network your Fusion is connected to
○ IP: IP address the Fusion module was assigned by WiFi network
○ Server: connection status
○ Firmware: version number of the WiFI firmware
○ Hardware: hardware revision of the WiFI module
○ Bootloader: version number of the WiFi Bootloader firmware
○ Serial Number: serial number of the WiFi module