TEC MA-156-1 SERIES - Installation and Programming; Paper Roll Installation Guide

- 9 -
EO1-11099
1
Set the Mode Select Switch to REG
positon.
2
3
Cut the paper end to make it sharp.
To remove the Printer Cover, insert the
Printer Cover/Drawer Key to the Printer
Cover Lock, and then Turn it 90° clock-
wise.
4
Hold the paper roll so that the paper end
will be fed from the bottom.
REG
OFF
SET
X
Z
8. Installing the Paper Roll
WARNING!
Care must be taken not to injure yourself with the paper cutter.