EO1-11099
- 41 -
Removing the Drawer
Pull out the drawer all the way until it hits the
stopper. Then lift up the drawer and pull it again.
Battery Exchange
To remove the Printer Cover, insert the
Printer Cover/Drawer key to the Printer Cover
Lock, and then turn it 90° clockwise.
2
Remove the Battery Cover.
3
To exchange batteries, please keep the power
cord of the register connected to the wall outlet.
If the batteries are removed with the power
cord disconnected, the programmed data and
sales data will all be cleared.
1
WARNING: Be certain to replace batteries with new ones
every year. If they run down, the programmed
data and sales data will all be cleared.
WARNING!
When opening the cash drawer, be careful not to let the drawer hit any person.
To Next Page
Loading...
Need help?
General
