TECE Uni - F 10 Filling Valve

4-6
Uni cistern
Converting drain valve A 1 to version A 2
If a drain valve is replaced as a spare part or the new
drain valve is modified because of the additional functions
(./. litre flush, throttle set), the new A drain valve
oers full compatibility with the old A  version.
The operating lever, twothrottles and valve seat are
included in the scope of delivery along with the A  drain
valve.
36 mm
42 mm
Conversion set 9820223, scope of delivery
The TECE cistern drain valve can be easily replaced.
The old A  drain valve should be disposed of, together
with the associated valve seat and seal.
When replacing an old A  drain valve with a new A  one,
care must be taken to ensure that the operating lever is
also replaced.
F 10 filling valve
The F  replacement filling valve (item no. )
universally fits in all TECE cisterns and in many competing
cisterns.
F 10 filling valve
Features:
• Low-noise in accordance with acoustic group  (DIN
)
• Field of application:  hPa to , hPa
• Minimum flow pressure:  hPa
• Adjustable filling level
• Compact design
• Adjustable outlet pipe