PREFACE&SAFETY SUMMARY
9
Remarks on safety of spectrophotometer
(a) Confirm the power supply to the spectrophotometer is AC100-240V.
(50Hz or 60Hz).Power is more than 1 KVA.
Fluctuation in voltage or noise on the power line would not only affect
the spectrophotometer main unit adversely but also cause an accident.
(b) Be sure to provide grounding connection along with power connection.
Make sure that the spectrophotometer is grounded at a grounding
resistance of 10ļ or less.
If grounding is improper, the spectrophotometer is easily affected by
external noise and floating voltage generated in it endangers physical
safety.
(c) High-voltage circuits are used inside the spectrophotometer.
Do not open any other cover than necessary for operation.
Avoid smoking and using a fire in the vicinity of the spectrophotometer.
Labels on spectrophotometer
There are warning labels of high pressure, high temperature on UV2600
Spectrophotometer. Pay attention to them during operation to avoid safety
accidents.
It is therefore recommended to back up the contents of the hard disk
beforehand.
To avoid misoperation, set space of more than 100 MB in computer
harddisk as work area for UV apllication software.
If programs or data has suddenly been destroyed, if an unexpected
operation takes place or if an abnormal display appears on the screen,
your personal computer may have been infiltrated by a computer virus.
The computer virus is a rogue program that secretly invades a personal
computer and operates it willfully while destroying memorized data.
A program for eliminating the virus is called vaccine program.
There is a possibility of contamination with a computer virus by
downloading through communication a program including a computer
virus, or by using an exchangeable recording medium such as a floppy
disk that contains a computer virus. Also, it is possible to transmit the
To Next Page
Loading...