CHAPTER 1 INSTALLATION
15
(such as an electric welding machine, high frequency furnace or pole
transformer).
e) Avoid a dusty environment (otherwise optical performance might
deteriorate).
f) The line voltage must be stable and free from a rapid fluctuation (otherwise
noise might increase).
g) Do not frequently turn on and off electric instruments (stirrer, vibrator, etc)
which are connected to the same power line as the UV2600 but are not fitted
with noise suppressors.
h) Height above sea level: ≤2000m.
I) Pollution degree: IP20.
J) Transient overvoltage is cagegory Ⅱ.
The optical system is very delicate.In addition, the control unit incorporates
high-density electronic circuit components which function as a computer.
The above cautions should be strictly observed.
After unpacking, check the contents of delivery against the packing list. If any
part is missing or damaged, or if you have a question, contact the nearest
Techcomp sales representative.
Figure 1-2 UV2600 Spectrophotometer Accessory
To Next Page
Loading...