Techcomp UV 2600 - Page 45

CHAPTER 4 MAINTENANCE
42
Figure 4-16 replacement and adjustment of WI lamp
Figure 4-17 Relative position of WI lamp facula and light-entrance slit
B）The adjustment of D2 lamp position are as follows:（Refer to Figure 4-18～
Figure 4-19）
(1) Turn off WI lamp.
Confirm WI
lamp facula at
this position.
Screw C
（Three）
Viewfinder
Screw A
Nut A
WI lamp
WI lamp facula
Light-entrance slit
Normal status
Horizontal deviation
Vertical deviation