PREFACE&SAFETY SUMMARY
5
Installation of this instrument shall be carried out by or under supervision of
qualified service personnel of Techcomp Corporation or its authorized service
agent.
Before installation of the instrument, the user shall make preparations for
satisfying the installation requirements in accordance with the instruction
manual.
If relocation of the instrument becomes necessary after initial installation
(delivery), please notify your local sales representative or nearest service
office of Techcomp.
Technology Training for User
For using the instrument safely and correctly, technology training speeches are
held at Techcomp’s or user’s site. Contact Techcomp for attending procedures.
Technology training speeches are payable, it will charge fee.
Disposal of this Instrument
When you discard equipment, please check and confirm some related
statute, law and practices .or ask the service section of Techcomp.
（1）Handling of Chemicals and Samples
(1) The user is responsible for following relevant legal standards and
regulations in handling, storage and discarding of chemicals and samples
used in analytical operations of this instrument.
(2) Reagents, standard solutions and accuracy-control samples shall be
handled, stored and discarded as instructed by the respective suppliers.
（2）Notice on Instruction Manuals
(1) Information contained in the instruction manuals furnished with the
instrument is subjected to change without notice for product improvement.
(2) This manual is copyrighted by Techcomp with all rights reserved.
(3) No part of this manual may be reproduced or transmitted in any form or
by any means without our express written permission.
To Next Page
Loading...