Technalogix TP1000 - Rack Mounting Procedures

11
2.3 Operating Temperature
The equipment is designed to operate within a 0 to 50⁰C (32 to 122⁰F) operating temperature
range. Install the equipment in an environment that fits the temperature operating requirements.
WARNING:
Avoid damage to the equipment. Your warranty is void if you operate this product
above the maximum specified operating temperature.
We recommend the following activities to moderate the operating temperature:
 Mount ventilation profiles at the bottom and top of the 19-inch equipment rack. This allows
the fresh air to enter and the hot air to leave the rack.
 Place the 19-inch equipment rack in a conditioned room with a temperature below 25°C
(77°F).
2.4 Rack Mounting
2.4.1 Tools and Accessories
You need the following tools and accessories for mounting the unit:
 Screwdriver.
 Support brackets and rack mounting screws.
2.4.2 Mounting Requirements
Follow the mounting guidelines below:
 Use 19-inch racks with the appropriate depth.
 Mount the unit adequately to secure optimal operation and reliability.
 Use rack-compatible support brackets to support the unit properly.
 Pay attention to the mechanical loading and stability to avoid hazardous situations.