Need help?Do you have a question about the Technalogix TP1000 and is the answer not in the manual?
General| Category | Gateway |
|---|---|
| Operating System | Linux |
| Connectivity | Wi-Fi, Ethernet |
| Ports | 2x USB, 1x Ethernet |
| Power Supply | 12V DC |
Provides crucial safety warnings and operational guidelines to prevent injury and product damage.
Covers trademark acknowledgments, publication disclaimers, and copyright information.
Details hazards and warnings related to electric shock and servicing procedures.
Provides a list of essential safety precautions for operating the equipment.
Covers initial setup, unpacking, dimensions, and environmental conditions for installation.
Details rack mounting procedures, tools, requirements, and connecting AC power.
Explains how to connect the management port using Ethernet cables for remote monitoring.
Guides on operating the device via its web-based management interface.
Instructions for configuring the device's IP address, subnet mask, and gateway for network connectivity.
Introduces the web UI and the login process to access the management system.
Describes the main interface elements, including the toolbar and status information.
Details the various tabs and options available in the web interface, such as Service, Module, and Equipment configuration.
Introduces the fundamental steps for configuring services, starting with input program setup.
Explains how to configure output streams for various modules like Gigabit IP, ASI, and QAM.
Details methods for transferring entire TS streams or individual programs between modules.
Guides on editing program/stream IDs and PIDs, including Network ID and TS ID.
Instructions for changing the equipment's IP address, network mask, gateway, and MAC address.
Details the procedure for updating or managing license files for the equipment modules.
Explains how to export and import configuration files for backup and restoration.
Provides instructions and warnings for upgrading the equipment's software and firmware.
Details how to manage user accounts, permissions, and passwords for system access.
Guides on setting parameters for the DVB-C module, including frequency, symbol rate, and QAM mode.
Details the configuration settings for the DVB-T receiving module, including frequency and bandwidth.
Explains how to set parameters for DVB-S/S2 modules, such as LNB settings and frequency.
Guides on configuring ASI input/output ports and constant bitrate settings.
Details the setup parameters for the IP I/O module, including IP address, subnet mask, and gateway.
Explains how to configure IP input for receiving multicast or unicast streams.
Guides on setting up IP output for transmitting multicast or unicast streams.
Details the configuration parameters for QAM/COFDM modules, including bandwidth and RF frequency.
Outlines the parameter settings for the 4-COFDM module.
Guides on setting up the CI descrambling module and its parameters.
Details the steps involved in performing a descramble operation using the CI module.
Details the configuration for encoding SDI/AV channels using H.264 format.
Covers the setup for encoding SDI/AV channels using MPEG2 format.
Provides configuration details for encoding HDMI channels using H.264 format.
Covers the initial setup for the DVB scrambler module, including IP and CAS configuration.
Details the configuration for ECMG and ECM parameters required for scrambling.
Outlines the EMMG parameters that need to be configured for the scrambling module.
Details the setup for transcoding MPEG-2 programs to MPEG4 format.
Guides on setting up the MPEG4 to MPEG2 transcoder module.
Covers setup for SD H.264/MPEG-2 SDI/AV encoding with low bit rates.
Details configuration for transcoding SD channels to MPEG-2 or H.264 at very low bit rates.
Explains how to insert Network Information Table (NIT) data for configuration.
Guides on activating and configuring the LCN feature for channel designation.
Describes how to insert an OTA descriptor into the NIT for STB upgrades.
Identifies and explains the function of each button on the device's front panel.
Outlines the hierarchical structure of the front panel menu system.
Provides a step-by-step guide for navigating and performing operations using the front panel controls.
Defines key technical terms and acronyms used throughout the manual.
To Next Page