Technalogix TP1000 - EMMG Setup Parameters

To Next Page

To Previous Page

this AC data.

Pic-3.1-55

Below are the key parameters:

Parameters

Description

ECM System ID

Showing the ECM System ID.

ECM ID

Showing the ECM ID.

ECM PID

Input a proper ECM PID.

AC Data (Hex)

Input proper AC data according to the requirement of the CA system.

4. EMMG setup: This page allow customer to set the EMMG parameters, these

parameters should be coincident with that configured in the CA system.

Pic-3.1-56