2404/2019 - EN/V9 Technetix Group Limited
Product user manual
DBE-1200S
2. Once the amplifier upstream/return path is commissioned, software values can be recorded on the PSU lid label
using a fine tip permanent marker pen. They can also be saved electronically on the laptop or Android device.
3. To save the amplifier settings electronically, enter the
amplifier ID number into the Amplifier name field as
shown below. Use the same name as for the upstream
activation.
4. Next click on the Tools tab and then click on Save current
state to file to save the setting to a suitable location on
the laptop. Filename will be the amplifier name as in the
screenshot and the date at time of saving.
To Next Page
Loading...
