Technica 100BASE-T1 SPY Mini User Manual

1000BASE-T1 SPY mini User Manual
18
5 1000Base-T1 SPY mini LUA Dissector for wrapped
data
In order to dissect the 1000Base-T1 SPY mini RAW Ethernet Frames, a LUA file for
Wireshark is available on Technica Engineering website. To install the LUA file in
Wireshark, the user must do the following steps:
1. Close Wireshark in case that the program is running on PC.
2. Download the .ZIP file that contains all the LUA files, through this website:
https://technica-engineering.de/produkt/1000base-t1-spy-mini/
https://technica-engineering.de/wp-
content/uploads/2018/06/1000BaseT1_SPY_Mini_Wireshark_Dissector.zi
p
3. Extract the downloaded ZIP file. This file should contain the following LUA file:
1000BaseT1_SPY_Mini_ETH_wrapper.lua
4. Copy or move the LUA file in Wireshark plugins folder. The path should be:
C:\Program Files\Wireshark\plugins\(Wireshark Version Number).
Note: Wireshark Version Number depends on the Wireshark version installed
on the PC
5. Copy or move the LUA file in Wireshark plugins folder. The path should be:
C:\Program Files\Wireshark\plugins\(Wireshark Version Number).
Note: Wireshark Version Number depends on the Wireshark version installed
on

Technica 100BASE-T1 SPY Mini Specifications

General

Brand	Technica
Model	100BASE-T1 SPY Mini
Category	Media Converter
Language	English