Technicolor TG672 User Manual

116
10 TECHNICOLOR
GATEWAY NETWORK SERVICES
E-DOC-CTC-20100728-0008 v2.0
10.1.3 Configuring UPnP on the Technicolor Gateway
Introduction
On the Technicolor Gateway GUI you can:
 Enable/Disable UPnP.
 Enable/Disable Extended Security.
Enable/Disable UPnP
Proceed as follows:
1 Browse to the Technicolor Gateway GUI.
For more information, see “Accessing the Technicolor Gateway GUI” on page 43.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play:
 Select the Use UPnP check box, to enable UPnP.
 Clear the Use UPnP check box, to disable UPnP.
4 Click Apply.
Extended Security
If Extended Security is enabled, only limited UPnP operation between the host and the Technicolor Gateway is allowed:
 A local host is not allowed to connect/disconnect the Technicolor Gateway Internet connection. You can then only
connect/disconnect the Internet connection via the Technicolor Gateway GUI
 Address translation mappings can only be added or changed via UPnP for the host on which the UPnP application is
running.
Enable/Disable Extended Security
Proceed as follows:
1 Browse to the Technicolor Gateway GUI.
For more information, see “Accessing the Technicolor Gateway GUI” on page 43.
2 On the Toolbox menu, click Game & Application Sharing.
3 Under Universal Plug and Play, select Use Extended Security.
4 Click Apply.

Technicolor TG672 Specifications

General

Brand	Technicolor
Model	TG672
Category	Gateway
Language	English