Technicolor TG672 - 4.2 Backing Up;Restoring your Configuration

40
3 MANUAL INSTAL
LATION
E-DOC-CTC-20100728-0008 v2.0
3.5.4 Inserting a Mobile USB Adapter
Procedure
Once the mobile connection is configured you can proceed as follows to insert the mobile USB adapter:
1 Power off the Technicolor Gateway.
2 Insert your SIM card into the mobile USB adapter.
3 Plug the mobile USB adapter in (one of) the USB port(s) of your Technicolor Gateway:
4 Power on the Technicolor Gateway.
If you do not power off the Technicolor Gateway first, the mobile USB adapter will not be detected.