27
3 MANUAL INSTALLATION
E-DOC-CTC-20100728-0008 v2.0
If your Technicolor Gateway has a black PSTN port on the back, you are able to use the PSTN (this is the traditional
telephone network) as a backup for your Voice over IP connection. When the VoIP connection is down, the Technicolor
Gateway will automatically switch back to the PSTN network.
To setup this backup connection:
1 Take a Telephone Cable
2 Plug one end of the cable in the black PSTN port on the back of your Technicolor Gateway.
3 Plug the other end of the cable into the Phone output port of your filter/splitter.
To Next Page
Loading...
Need help?
General
