88
8 SHARING CONTE
NT ON YOUR TECHNICOLOR GA
TEWAY
E-DOC-CTC-20100728-0008 v2.0
Configuration
All servers are enabled by default. The only thing that you need to do is to plug your USB memory stick or external hard
disk in (one of) the USB port(s) of your Technicolor Gateway.
By using a USB hub, you can connect up to five USB mass storage devices to the Technicolor Gateway.
Do not remove your USB storage device without stopping it first, otherwise data might be lost! For more
information, see “8.5 Safely Removing your USB Storage Device” on page 100.
To Next Page
Loading...
