To Next PageTo Next Page
Need help?Do you have a question about the Technics QUARTZ SA-160 and is the answer not in the manual?
General| Frequency Response | 20Hz to 20kHz |
|---|---|
| Total Harmonic Distortion | 0.04% |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Tuning range | FM, MW |
| Damping factor | 30 |
| Output | 150mV (line) |
| Speaker load impedance | 8Ω to 16Ω |
| Dimensions | 430 x 145 x 239 mm |
| Channel separation | 50dB (line) |
| Power Output | 20 watts per channel into 8Ω (stereo) |
Details power output, distortion, input sensitivity, and frequency response for audio amplification.
Covers FM frequency range, sensitivity, selectivity, distortion, and stereo performance.
Provides power supply, consumption, dimensions, and weight information for the receiver.
Instructions for connecting a turntable, including ground wire connection for remote operation.
Guides for connecting video cassette recorders or tape decks to the receiver's input/output jacks.
Details on connecting main and remote speakers, including impedance considerations.
Describes the audio input selector/frequency display, tape indicator, and loudness indicator.
Explains equalizer, loudness, balance, volume, input selectors, tape monitor, and tuner controls.
Details the power switch, headphones jack, and speaker selectors for operation.
Explains FM stereo, memory, signal strength, quartz lock indicators, and FM mode selection.
Describes preset tuning, memory, and scan/search buttons for FM/AM broadcasts.
Important safety notes and precautions for servicing personnel, including sharp edges.
Explains the unit's protection circuit and how to reset it after an occurrence.
Crucial steps before servicing, like discharging capacitors and using a variac.
Step-by-step guides for adjusting FM mono/stereo distortion and stereo separation.
Detailed pin functions for the LC6554H3682 microcomputer IC.
Guide to terminal connections for various ICs, transistors, and diodes.
