Technics RS-B655 User Manual

tr
tr
APRS
indicator
(APRS)
llluminates to indicate
that the
"APRS"
is
set
to
"on"
in the
recording
stand-by mode.
Multiplex filter
indicator
(MPX)
llluminates to indicate
that the multiplex filter is
set
to
"on".
@
OolUy noise-reduction
indicators
(@,
@)
Each indicator illuminates
to
show
the type of
Dolby noise-
reduction
system
selected by
pressing
one of the
Dolby
noise-reduction buttons.
tr
E
tr
E
a
tr
E
tr
tr
a
Record button and
indicator
(rec/O)
This
button can be used
to change the tape deck to
the
recording stand-by mode.
This indicator illuminates to indicate that this tape deck
is in
the
recording
stand-by
mode, or is recording.
Automatic-record-muting button
(auto
rec mute/O)
This
button can be used
to make a silent interval on the tape
being
recorded
on tape deck.
Pause
button
(pause/l
l)
This button can be used to temporarily stop
the tape
playback
or
recording
of
tape
deck.
Rewind/fast-forward/search
buttons
(rewllllttl>)l
These
buttons can be used to fast foruard or rewind the tape,
or to easily
search
for
the tune's beginning of the tape
quickly.
@
Playback button and
indicator
(play/))
This
button can be
used to start the
playback
or
recording
of
the cassette.
(The
tape will
then begin
moving in the left-to-right direction.)
When
this
indicator illuminates
steadily,
it indicates that this
tape
deck
is in the
playback
mode
or
the recording mode.
When it flashes continually, this is an indication that this tape
deck is
in
the
pause
mode
or the
recording
stand-by
mode.
@
Stop button
(stop/r)
=-n;;r-edu;rb;
- -'l
i
B-DolbyNR-C
I
I
timer
switch
(E
timer)
This
switch
is used to automatically
begin a tape recording or
tape
playback
at a certain time, selected
by a timer
(not
included).
(Refer
to
page
14.)
Counter buttons
(counter
reseUmode)
mode:
This
button can be
used to select the taDe/linear
counter
indicatron.
reset:
This
button can
be used to reset the tape/linear
counter
indication to
"0000".
Memory-mode buttons
(memory
repeaVstop)
stop:
This
button
can be used to
rewind
the tape
to
the
preset
"0000"
point
when the rewind
({{)
button
is
pressed.
(Refer
to
pages
8 and
11.)
lepeat:
This button can be used
to
set
this unit to the
"A-B
repeat" mode.
(Refer
to
page
9.)
Meter-range selector
(meter
range)
This
selector can be
used to
select
the meter-range display of
the input level meter.
Multiplex filter switch
(MPX
filter)
This switch can be used
during the recording
of an
FM
stereo broadcast that employs
Dolby noise reduction so as to
prevent
misoperation
of the
Dolby noise reduction,
(Refer
to
page
13.)
Dolby
noise-reduction
buttons
(noise
reduction)
These buttons are used
to
reduce
the hissing
noise heard
from
the tape.
This
unit
is
provided
with
both
the B-type
and
C-type noise-reduction systems.
(Refer
to
pages
6-7.)
APRS
button
(APRS)
This
button can be used to hold
the oeak level while
monitoring
the input sound.
The
"APRS"
can only be used in the recording
stand-by
mode.
(Refer
to
page
12.)
This
button can be
used to stop tape movement.

Technics RS-B655 Specifications

Power

power consumption	21 W
power supply frequency	50 Hz/60 Hz
power supply voltage	240 V

Audio Specifications

wow and flutter	0.05% (wRMS)
frequency response (Normal)	20 Hz-18 kHz
frequency response (CrOz)	20 Hz-18 kHz
frequency response (Metal)	20 Hz-19 kHz
S/N ratio (Dolby C NR on)	74 dB
S/N ratio (Dolby B NR on)	66 dB
S/N ratio (Dolby NR off)	56 dB

Weight and Dimensions

dimensions	430x135x290 mm
weight	4.9 kg