Technics RS-D225W - Series Playback; Edit-Recording

Dolby noise-reduction systems
Because the level of tape noise is a fixed level, such noise is
more easily heard as the level of the music signais becomes
lower. Thus, when a recording is made, tow levels are recorded
at a high level, and, when this recording is played back, it is
played back, conversely, at a low level.
Because the tape noise will also be then played back at a low
level, the result is a reduction in the noise level.
eDolby noise reduction system manufactured under license from
Dolby Laboratories Licensing Corporation.
e“Dolby” and the double-D symbol are trademarks of Dolby
Laboratories Licensing Corporation.
Automatic tape selector system
This cassette deck automatically detects the type of tape being
used, and adjusts for the proper bias and equalization.
When tape deck 2 is used, the tape indicator illumination will
correspond to the type of tape used in tape deck 2.
Edit-Recording
eThe remote-control unit cannot be used for tape operation
during edit recording.
¢To make non-recorded space (about four seconds long)
Preparations for recording
Press, then insert
the tape to be used
for recording.
1 Power: “on” (H—>m=)
Press.
6 (The recording
indicator will be
illuminated.)
Series playback
Playback is continuous from tape deck 1 to tape deck 2 (or from
tape deck 2 to tape deck 1).
When starting from tape deck 2
1 Press. 2 Press.
RS-D225W }
2 Press. 1 Press.
When starting from tape deck 1
between tunes, press the stop button for tape deck 1.
(The restart of the recording can be started by pressing the
playback button once again.)
Preparations for playback
Press, then insert the recorded tape to be
played back.
‘on’ (H— =)
Select the tape speed.
m= X2...at double speed.
Xx1...at normal speed.
ai Tape deck
(RS-D225W)
a one a | Doty hi
Phat a
Press.
(TAPE DECK 1 playback and TAPE DECK 2 recording
will then begin.)