Technics SA-C100

93
(Continued)
Network standby
“Standby Mode”
When this function is set to “On”, then this unit
automatically turns on in the following cases.
 When a Bluetooth
®
connection is established to
this unit from a paired Bluetooth
®
device.
 When playback operations are performed on this
unit from a device connected to the network.
• The factory default is “On”. To disable this
function, select “Off”.
Switching this unit’s input source
automatically
“OPT-IN Auto Play”
Switching this unit’s input source to “OPT”
automatically when the audio outputs from the
device connected with optical digital input terminal.
• While setting to “On”, this unit turns on and
switches the input source to “OPT” according to
the audio signal from the device connected with
optical digital input terminal even when this unit is
in standby mode.
• The factory default is “Off”.
Network settings
“Network”
Wi-Fi setting
“Wi-Fi Menu”
The wireless LAN function can be enabled or
disabled.
• The factory default is “On”.
Displaying the network icon
“Network Indicator”
Set to “Off” to turn the network icon (Wired LAN /
Wireless LAN) off from the display.
• The factory default is “On”.