To Next PageTo Next Page
Need help?Do you have a question about the Technics SL-5200ES and is the answer not in the manual?
General| Drive Method | Direct Drive |
|---|---|
| Wow and Flutter | 0.025% WRMS |
| Effective Length | 230mm |
| Overhang | 15mm |
| Turntable Platter | Aluminum Die-Cast |
| Speeds | 33 1/3 and 45rpm |
| Rumble | 78dB (DIN-B) |
Details on the moving magnetic cartridge specifications, including frequency response and output voltage.
Specifications for a second moving magnetic stereo cartridge, including frequency response and output voltage.
List of replacement parts, detailing part numbers and descriptions for various models.
Lists of component types like switches, capacitors, chassis parts, accessories, and packings.
General specifications of the turntable system, including power supply, dimensions, and weight.
Detailed specifications for the turntable section, including drive method, motor, and speeds.
Specifications for the tonearm and cartridge, covering type, response, and voltage.
Step-by-step instructions for removing the bottom board of the unit.
Instructions for removing the front panel and hinge mechanism of the unit.
Diagram showing the arrangement of parts within the cabinet assembly.
Diagram illustrating the arrangement of parts within the arm base assembly.
Advanced electronic circuit and quartz phase-locked control for stable rotational performance.
Details on vibration-damping construction and the low-mass tonearm with muting circuit.
Key features including front-panel controls, stylus illuminator, and cueing.
Instructions for injecting silicon oil to maintain proper tonearm movement.
Procedures for adjusting tonearm overhang with or without a dedicated gauge.
Step-by-step guide for operating the turntable in manual play mode.
Instructions on stopping play, suspending, and storing the unit.
Specific instructions for 45-rpm records and stylus illuminator operation.
Procedure for adjusting the horizontal zero balance and stylus pressure of the tonearm.
Guidance on how to adjust the anti-skating control for optimal tracking.
Procedures for adjusting the arm-lift height and the automatic return mechanism.
Methods for fine-tuning turntable speed and adjusting the muting mechanism.
Details of the select circuit board and its components.
Information on pitch and speed control volume components and their connections.
Schematic representation of power supply, control, and switch circuits.
Schematic diagram of the motor, drive circuitry, and associated components.
Guide to transistor and IC terminals, showing pin configurations and types.
Reference voltages and waveforms at IC pins and test points for diagnosis.
Points for electrical system adjustments, including tracking and speed settings.
Troubleshooting steps for when the unit fails to start or rotate.
Troubleshooting steps for runaway operation, speed changeover, and pitch control issues.
Exploded view of the automatic mechanism assembly, showing all component parts.
Exploded view of the operation support assembly, detailing its constituent parts.
List of replacement parts for the unit's cabinet, chassis, and operation support assembly.
Replacement parts for the automatic mechanism assembly and lists of screws/circlips.
List of replacement accessories for the turntable system.
List of replacement packing materials for the turntable.
