Technics SU-A900DM2 - Page 5

| SE-A900SM2
Connecting the speakers cE
:
The
wires
which
are
connected
to
the
positive
(+)
terminals
of
the
O-D-@
:
amplifier
should
be
connected
to
the
positive
(+)
terminals
of
the
speakers.
The
negative
(-)
terminals
should
be
connected
in
a
simi-
lar way.
Speaker cables (not included)
(+) > ———_—____—__—_—————_t (+)
(=) (=)
To connect speaker cables to terminals ©
@®
Strip
off
the
outer
covering,
and
4wist
the
center
conductor.
> Turn the knob completely to the left.
@: Insert the wire and turn the knob completely to the right. Pull the
cord to assure a proper connection.
M “B” terminals
For connection to a second pair of speakers.
Mi Speaker impedance
: When only the “A” or only the "B” terminals are used: 4-16 2
(@)
Right
speaker
©
Left
speaker
:
.
a e When both the “A” and the “B” terminals are used simultaneousy:
(not included) (not included) = § 8-169
To
prevent
damage
to
circuitry,
never
short-circuit
the
positive
{+)
and
negative
(-)
speaker
wires.
§ 10-15 mm
poe
:
;
i
:
Connecting
the
power
supply
Connect the power supply only after all other connections have
been made.
2 Insertion of Connector
Even when the connector is perfectly
inserted, depending on the type of
inlet used, the front part of the con-
nector may jut out as shown in the
drawing.
Approx. 6mm S
However there is no problem using | Appliance iniet
: _ : the unit.y.
1 © Household AC | |
outlet le} :
fs
@)
AC
power
supply
cord
(included)
:
Cooling
fan
|
The cooling fan operates at high power output levels only.
SE-A900SM2
@) Cooling fan