Technika 42-502 - Basic TV Operation; Initial Setup & Auto Scan

TV SETUP
E-14
BASIC OPERATION
TURNING THE UNIT ON FOR THE FIRST TIME
Thersttimeyouturntheuniton,itwillgostraightintoAutoscanmode.Simplyfollowthescreenpromptsas
below to tune in the channels.
1. Use the
/ button to select the screen menu
language you prefer.
2.Usethe button to highlight Auto Tuning and
press the ENTER/OK button to enter Auto Tuning
menu.
3.Usethe / button to select the Country you are
in.
4.Use the button to move to Start. Press the
ENTER/OKbuttontoconrmStart.Thesystemwill
automatically start to scan and preset all available
programmes.
5.Afterscanninghasnished,theTVwilldisplaytherstprogrammesstored.
When you turn on your television set for the first
time, be sure to place it on a solid stable surface. To
avoid danger, do not expose the TV to water or a heat
source (e.g. lamp, candle, radiator). Do not obstruct
the ventilation grid at the rear and be sure to leave
sufficient gaps around the unit as shown.
4"
4"
4"
EXIT EXIT RETURN OK ENTER
NEW INSTALLATION
Language
Auto Tuning
English
TV
TV