To Next PageTo Next Page
Need help?Do you have a question about the TechnipFMC Smith Meter G6 and is the answer not in the manual?
General| Brand | TechnipFMC |
|---|---|
| Model | Smith Meter G6 |
| Category | Measuring Instruments |
| Language | English |
Overview of the double case rotary meter construction and measuring function.
General advice and precautions for disassembling the meter.
Lists necessary tools and equipment for meter disassembly.
Steps for removing the outer cover and associated parts.
Guidance on maintaining the high-pressure packing gland.
Detailed steps for servicing the high-pressure packing gland.
Procedure for removing the gear train from the meter cover.
Information on the inner mechanism and rotor adjustment.
Steps for adjusting rotor end clearance on specific meter models.
Adjustment procedure for H8 and JA10 meter rotor end clearance.
Steps for removing and disassembling the inner mechanism.
Procedure for removing rotor cover rollers and associated parts.
Notes differences in rotor spring for the C2 series meter.
Lists recommended minimum and maximum fitting clearances for meters.
Guidance on checking clearances using feeler gauges.
How to measure blade slot clearance using feeler gauges.
Method for measuring blade top end clearance with a micrometer.
How to measure blade tip to housing clearance using a spider.
Procedure for measuring rotor to block clearance using a spider.
How to measure blade roller to cam radius clearance.
Alternative method for measuring blade roller to cam radius difference.
Procedure for adjusting rotor and checking total end clearance.
Template for recording meter clearance measurements.
Procedure for setting total end clearances by adjusting the rotor.
Determining and recording rotor to block and blade slot clearances.
Steps for correctly assembling the inner unit into the outer housing.
Applying Loctite 518 for sealing the inner mechanism to the housing.
Detailed steps for applying sealant to cinch bolts during assembly.
Final steps for completing the meter reassembly process.
Instructions for installing and torquing cover screws.
Steps for installing and torquing packing gland screws.
