Need help?Do you have a question about the TechnipFMC Smith Meter AccuLoad IV Series and is the answer not in the manual?
General| Model | AccuLoad IV Series |
|---|---|
| Manufacturer | TechnipFMC Smith Meter |
| Category | Measuring Instruments |
| Communication Protocols | Modbus |
| Power Supply | 24 VDC |
| Operating Temperature | -40°C to 70°C |
| Capacity | Varies |
| Output | 4-20 mA |
| Enclosure Rating | NEMA 4X, IP66 |
Essential safety warnings, cautions, and important notes for installation and operation.
Requirements for wiring, conduit, cable types, and grounding for safe and reliable operation.
Detailed procedures for electrical connections, including ATEX/IECEx compliance.
Detailed wiring diagrams and pinouts for the A4M electronic module.
Wiring details and diagrams for the A4B module, used in QT and SA models.
Wiring diagrams and pinouts for the optional A41 module.
Details on connecting AC power to the AccuLoad, including separate circuits.
Powering the AccuLoad modules and external equipment using DC supply.
Requirements for proper earth grounding to ensure safety and reliable operation.
Description of various analog input/output modules and their functions.
Recommended networking strategy for Ethernet connectivity and security.
Step-by-step guide to modifying the AccuLoad IV's internal IP address.
Specific connection details for various meter types like Prime 4, Genesis, UPT.
Assignments of pulse inputs for product meters based on meter type and quantity.
Procedure for securely closing the AccuLoad enclosure for explosion-proof environments.
Procedures for inspecting and maintaining enclosure flame paths and seals.
Steps and required equipment for recalibrating the touch screen.
Detailed procedure for performing touch screen recalibration on the display module.
Instructions for replacing the AccuLoad IV's internal clock battery.
To Next Page