8.9. Analog Output
AccuLoad – A4M
TBE5
RTD +
SIG X +
SIG X -
RTD -
Ground (TBE4)
4-20mA
Receiving Device
No Connection
No Connection
Figure 29. Analog outputs
8.10. Meter Pulses (Product or Additive Meters)
AccuLoad A4M / A4B
External Meter
Pulse Wiring
Pulse Input
Pulse Input+
DC Ground from A4M
TBE4 - 13, 14 or 15
Open collector
meter output
+24 VDC from A4M
TBE4 - 10, 11 or 12
Figure 30. External counter wiring
See A4M Board Layout terminals (section 6.1) for meter pulse input terminal locations.
Note:
MN06117 for details.
8.11. Pulse Outputs
Table 16. 5 pulse output configurations for the AccuLoad
To Next Page
Loading...
Need help?
General
