3.2. General Requirements
(a)
equipment into service.
to maintain the integrity of those special features.
The operator must ensure that electrical equipment is:
• Installed and operated correctly
•
• Maintained with due regard to safety
(b)
their respective conduit openings.
(c)
(d)
If other communicating devices are used with the AccuLoad, refer to the manual
for that unit for shielding information. Shields for other communicating equipment
Note:
(e)
individual wires..
(f)
to the proper grounding point. See Pre-Installation section.
(g)
wiring the ancillary equipment, refer to its installation manual.
To Next Page
Loading...
