5.4.1 Arrow selection method
> If is shown on the left and on the right next to the set value, you can alter this
using the left / right arrow keys.
5.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the
selection list.
> Press the OK button to open the selection list.
> Highlight the setting you want using the up / down arrow keys.
By pressing the up / down arrow keys it is possible to move the highlight from line
to line, and to move upwards and downwards page by page using the page up /
down buttons.
> Confirm by pressing the OK button. The selection list closes again and the selected
setting is shown in the menu.
18
To Next Page
Loading...
Need help?
General
