15 Encryption system
Under this menu item you can go to the submenus of the inserted smartcard and the CI- / CI+
module.
> Call up Main menu > Conditional Access.
> Select the inserted CI- / CI+ module to access its submenu and apply settings.
Note that the submenu now shown is provided by the module and can therefore differ
from module to module.
15.1 Conditional Access Settings
CI dual decryption
With CI dual decryption it is possible to simultaneously receive two different encrypted
programmes with just a CI module and a valid smartcard.
> For the CI dual decryption, select on or auto (for automatic detection), or switch the
function off.
Please note that both channels to be decrypted must be on the same transponder.
CAM-MHEG Autostart
If a CAM-MHEG application is available for an application, this can be started automatically.
> Set the CAM-MHEG Autostart item to on or switch the function off.
49
To Next Page
Loading...
Need help?
General
