16.2 Channel selection (ISI mode)
16.2.1 Using the channel up / down buttons
> Use the up / down arrow keys on the receiver to select a channel, or use the
Channel + / - buttons on the remote control to scroll up or down the channel
settings.
16.2.2 Using the numeric pad keys
> Use the numeric keypad keys to enter the number of the channel you want.
For example:
1 for channel slot 1
1, then 4 for channel slot 14
2, then 3, then 4 for channel slot 234
1, then 5, then 6 then 7 for channel slot 1567
When entering channel numbers with multiple digits, you have approx. three seconds after
pressing a key to complete the entry.
If you wish to enter a number consisting of only one, two or three digits, you can speed up
the entry procedure by keeping the key depressed a little longer on the last digit.
16.2.3 Using the Navigator (channel list)
> Press the OK button.
The channel list navigator will appear. In TV mode only TV channels are shown, and in radio
mode only radio channels are shown.
The channel currently selected is highlighted.
> You can now use the up / down arrow keys, to move the page up / down and
the numeric pad keys to highlight the desired channel.
> Press the OK button to select the highlighted channel.
16.3 Switching between TV / radio
> Using the 0 button, call up the NAV menu.
51
To Next Page
Loading...
Need help?
General
