To cancel the entry, select the field and press the OK button. If you
have made a typing error, you can delete the last letter entered by pressing .
>
Then select and press the OK button. If the password was correct, a
connection to this network will now be established.
>
When [Setup wizard completed] appears on the display, press
the OK button.
For more information on setting up a network connection, please refer
to
chapter "17.3 Internet settings" on page 30.
17.11
Info
>
Press the MENU button and then select
[System settings] > [Info].
>
Confirm by pressing OK.
>
The Sokware versions are displayed.
17.12
Display illumination
You can set the display brightness for both operation and standby.
>
Press the MENU button and then select
[System settings] > [Lighting].
>
Select [Operation] or [Standby] to adjust the brightness setting for
operation or standby mode.
>
You can adjust the brightness in three steps.
>
Confirm the selection with OK.
Auto dimming
>
When the auto-dimming function is active, the display is set to the standby
brightness value after the set time.
17.13
Data protection information
>
Press the MENU button and then select
[System settings] > [Privacy policy].
Here you will find the link to the current privacy policy for your device.
>
Press the MENU button to switch back.
To Next Page
Loading...
Need help?
General