TechniSat TechniCorder ISIO STC User Manual

21
5.4.1 Arrow selection method
> If is shown on the left and on the right next to the set value, you can alter this using
the left/right arrow keys.
5.4.2 Selection list
If is shown on the right next to the set value, the value can be changed using the selection
list.
> Press the OK button to open the selection list.
> Highlight the setting you want using the up/down arrow keys.
By pressing the up/down arrow keys it is possible to move the highlight from line
to line and to move upwards and downwards page by page using the page
up/down buttons.
> Confirm by pressing the OK button. The selection list closes again and the selected
setting is shown in the menu.

TechniSat TechniCorder ISIO STC Specifications

General

HDTV	Yes
PVR ready	Yes
Operating System	Linux
Video Decoding	MPEG-2, MPEG-4, H.264
Ethernet Port	Yes
Tuner Type	DVB-S2
Type	Receiver
Video Output	HDMI
Audio Output	optical
Network Connectivity	Ethernet
Audio Decoding	MPEG, AAC
HDMI Output	Yes
Smartcard Reader	Yes